Jotul Discover the Zensoric Technology
Jotul has designed a stove where traditional wood burning meets tomorrow with the very latest technology.
Jotul’s Zensoic technology is a revolutionary and user-friendly solution that brings the simple act of wood burning into today’s modern tech world for a highly efficient and low-emission burn. This technology is an advanced automatic air control, which has been developed to optimise combustion and simplify the operation of wood-burning stoves. In a wood-burning stove, combustion can primarily be influenced by the total amount of air and the air distribution.
The technology has been designed to eliminate user errors, making the fire more efficient, sustainable, and user-friendly. The stove has sensors that monitor the temperature and airflow inside the stove to add the correct amount of oxygen exactly at the right time. The sensors are then able to quickly adjust the airflow to the stove to change the firewood burning conditions to optimize the combustion process. This technology then reduces any energy waste and enhances the wood stove’s optimum performance. Not only does this Zensoic technology improve the whole stove’s performance for clean combustion, which is difficult with a manually operated log burner. It also optimises the air supply, giving you cleaner and more efficient burning, benefiting the environment and your budget. It also minimises the soot on the glass of the wood stove.
Changes in temperature identify the combustion phases, which regulate the combustion air.
Ignition:
During ignition, Zensoric provides a burst of air to quickly start the fire.
Main Combustion:
In the main burning phase, the amount of ignition air, secondary air, and air-wash is reduced. At the same time, the amount of tertiary air is increased. This is to keep the oxygen level consistent and prevent excessive burning.
Burnout:
Zensoric increases ignition air flow as the fire goes out. This ensures efficient burnout and reduces the amount of ashes left in the burn chamber.
Power management for Zensoric
Zensoric technology has transformed the way you operate your wood-burning stove, making it as simple as it is groundbreaking. This innovative wood stove does it all for you, even signalling when it’s time to add more firewood.
Zensoric is controlled by a small motor to regulate airflow accurately through advanced sensor technology.
The motor is powered by a rechargeable battery, easily charged through the USB-C slot using a mobile charger or power bank.
The charger plug conveniently sits at the bottom front of the wood stove.
It takes only 2-3 hours to fully charge it before first use, and it maintains its power throughout an entire firing season. Recharge Zensoric at the end of each firing season to ensure optimal performance.
In case of low battery power or sensor malfunction, the log-burning stove seamlessly transitions to a safe manual control mode so you can operate it manually.
This versatile and self-sufficient system truly enhances the wood-burning experience, offering both convenience and efficiency.
How to use your new Zensoric stove
Ready for use?
Open the door and check for a green signal to confirm your wood stove is ready for use.
Stack and light
Use the “top-down” method to build your fire. Ignite the fire and close the door.
Make sure you are using dry wood for your fire.
Relax and wait
Zensoric takes care of everything for you after ignition. The wood stove will give a light-signal when it’s time to add more firewood, it really is as simple as that. The Zensoric technology will take over and do the work for you, so you can sit back and simply enjoy the fire’s flames and heat.
This Zensoric technology is currently only available on 3 stove models…
JØTUL F 171 ZENSORIC
JØTUL F 174 ZENSORIC
JØTUL F 176 ZENSORIC
